Our 2004 Aliner Classic


The posts in this blog were moved from a much older site that I started in the mid-2000s. Some of the information is out of date, but there are also mods and information that may be adaptable to owners of newer camper models.
You can find details about our other campers at: 2007 LXE Mods and 2009 Alite Mods.   Return to Lynn's Mods.

 Anticipating retirement and wanting to camp with grandchildren, we purchased our 2004 Aliner from Oldtown Camper Sales (no longer in business) in Winston-Salem, NC.  We were lucky to find one on the lot with most of the features on our "wish list".  It was a DL model, now called the "Classic", with rear gaucho sofa (slide-out plywood) and front bed/dinette.  It came equipped with the galley package (including 3-way fridge/freezer and I/O stove), sink, gas furnace, AC, pull-out step, battery, large rear bubble window, two front bubble windows and two opening roof vents.  In November 2004, the dealer added a Fantastic Fan and electric brakes.  It was quite a step up from our old canvas popup, and we loved it.

Comments

Post a Comment

Popular posts from this blog

Body Mods - Exterior

Image
Plug-Guard I mounted a Plug-Guard on the tongue to protect the trailer end of the hitch wiring harness when it was not connected to the tow vehicle. I minimized drilling through the tongue by using an existing hole for one of the bolts. Carpeted Step From a residential plastic doormat, I cut a piece to fit the step. I used stainless bolts, nuts and washers to fasten it to holes in the metal step. The rest of the mat stays on the ground. A thin fiber mat just fits inside the door so we can wipe our feet. Together, they did a good job of keeping dirt out of the camper. Doorstop-Flagpole Since the roof prevented the door from opening all the way, I needed a stop to prevent damage from a gust of wind. With wing nuts and washers, I fastened a u-bolt to the slot in the right side of the step, and slipped a broom handle through it. Now it serves double-duty as a door stop and flag pole. It's easy to roll up the flag and unscrew the u-bolt for travel.  ...
Read more

Body Mods - Interior

Image
A/C Cabinet The cabinet to the left of the door, in front of the A/C, came equipped with a hinged door above 2 drawers. The cabinet door was almost unusable because it was hinged at the bottom and would bind against the drawer hardware when opened. I removed it and found a plastic 4-drawer cabinet that I screwed in place in the open space. That gave better ventilation for the A/C, and left a small space to the side that became our "library" for dictionary, field guides, and cookbook. For a finished look, I used a utility knife to cut fake oak trim (from Lowe's) to fit, nailed it in place, and filled the nail holes with colored putty. I added small screw eyes to the underside of the countertop where we hook bungees to hold the plastic drawers closed during travel.The drawers below the plastic unit had plastic drawer stops that kept them from opening all the way, making it difficult to use the whole drawer. I cut them off and fashioned new stops from small strips of a...
Read more